Filter
Top Products
31
Special Features
Follow these steps to select a different channel in a
bank as the priority channel.
1. Manually select the channel you want to select
as the priority channel.
2. Press FNC + PRI. P appears above the selected
channel number.
3. Repeat Steps 1 and 2 for the channel in each
bank you want to program as a priority channel.
Note: If all priority channel is locked out, All Loc
appears.
Monitor
1. While press and holding MON, Monitor Mode is
turned on.
2. To exit Monitor Mode, release MON.
Using Keylock
Use the scanner's keylock to protect it from
accidental program changes. When the scanner's
keys are locked, the only controls that operate are
, PWR, FNC, MON, LIGHT and RSM/HOLD.
To turn on keylock, press FNC + .
appears. To turn off keylock, press FNC + .
disappears.
Note: Using keylock does not prevent the scanner
from scanning channels.
Using the Display Backlight
To turn on the display light for easy viewing at night,
press FNC + LIGHT. The display lights for 15
seconds. To turn off the light sooner, press FNC +
LIGHT again.
UB333 Paper OM reduced size.fm Page 31 Friday, June 3, 2005 1:43 PM