Filter
Top Products
r
Setting the Squelch
1. Turn until hiss heard.
I 2. Turn just until hiss stops.
~-
~
This action lowers the
"squelch gate," allowing
all signals and noise to
get through.
No signal should be
present when adjusting
squelch.
Scanner doesn't scan
with squelch open.
~
~
This action raises the
"squelch gate," allowing
only strong signals to get
through.
Scanner should begin
scanning after two
seconds.
Note: You must have at
least one channel
programmed before the
UBC60XL T willscan.
Turn
the scanner on.
Scanning Programmed Channels
3
e ;C.i); :(
(::MAK> 4
Channel numbers
advance rapidly.
Note: When you turn the
scanner on, it will
always
be in Scan mode.
1
/'
12