Filter
Top Products
16
Setting Up Your Scanner
3. Install two batteries in the compartment as
indicated by the polarity symbols (+ and -)
marked inside.
4. Replace the cover.
5. Connect the supplied AC adapter to the
scanner's DC 6V to charge the batteries. (See
“Using AC Power” on page 18.)
Using Non-Rechargeble Batteries
You can also use two alkaline batteries to power
your scanner. Before you use alkaline batteries, you
must remove the sticker in the compartment and
move the switch to REG. ALK. BATT position.
Removesticker and
set switch for use of
Alkaline batteries.
UB323 Paper OM reduced size.fm Page 16 Tuesday, February 1, 2005 11:53 AM