Filter
Top Products
Note: • You can also ▲ or ▼ when selecting a channel. Press and hold ▲ or ▼ for
1second to move up/down more quickly.
• To clear a mistake while entering the frequency, press (decimal key) repeatedly
until the display is cleared.
• If you enter a channel or frequency which is out of the
scanner’s range, a beep will sound and
ERROR
appears on the display.
• For each channel, you can also change the step size or
the mode. (See page 53).
Deleting a Stored Frequency
1. Press MENU.
2. Select
2:SCAN OPTION by rotating the VFO and
pressing
E.
3. Select the channel number you want to edit by rotating the
VFO and pressing E.
4. Select
1:FREQUENCY using the keypad and pressing E.
5. Press
0 and pressing E.
☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
Note: Channels with no frequencies are automatically
locked out.
Editing a Stored Frequency
1. Press MENU.
2. Select
2:SCAN OPTION by rotating the VFO and pressing E.
3. Select the channel number you want to edit using the keypad and pressing
E.
4. Select
1:FREQUENCY by rotating the VFO and pressing E.
5. Enter a frequency by using (decimal key) and the keypad and pressing
E.
☞ Remember! You can use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing
E, you can press the VFO control.
Duplicate Frequency Alert
If you enter a frequency which has been stored in other channel,
you will hear a beep and the scanner displays
WARNING.
Press (decimal key) to enter a different frequency.
––– OR –––
Press
E again to store the frequency in both channels.
.
.
.
25
C 010
512.0000 FM
ERROR
OUT OF CHANNEL
C 010
512.0000 FM
ERROR
OUT OF BAND
C 010
512.0000 FM
WARNING
DUPLICATE 017
C1000
0000.0000
UB343ZH_UBC785XLT_OM_0622 6/22/06 3:01 PM Page 25