Uniden UBC93XLT Scanner User Manual


 
44
Special Features
If the scanner is scanning and stops on an active
channel where you want to store a delay, quickly
press Func + Dly before it continues scanning
again. DLY appears.
If the desired channel is not selected, manually
select the channel, then press Func + Dly. DLY
appears.
If the scanner is searching, press Func + Dly
while the scanner is searching. DLY appears and
the scanner automatically adds a 2-second
delay to every frequency it stops on in that band.
To turn off the 2-second delay, press Func + Dly
while the scanner is monitoring a channel, scanning,
or searching. DLY disappears.
Turning Channel-Storage Banks
On and Off
You can turn each channel-storage bank on and off.
When you turn off a bank, the scanner does not
scan any of the 20 channels in that bank.
While scanning, press the number key that
corresponds to the bank you want to turn on or off.
Numbers appear at the top of the display, showing
the currently selected banks.
The scanner scans all the channels within the
displayed banks that are not locked out (see “Lock-
ing Out Channels” on Page 45). The bank number
flashes when the scanner scans a channel that
belongs to the bank.
Notes:
You can manually select any channel within a
bank, even if that bank is turned off.
You cannot turn off all banks. One bank must
always be active.
UBC93XLT Paper OM.fm Page 44 Monday, May 14, 2007 9:01 AM