Uniden UBC93XLT Scanner User Manual


 
51
Care and Maintenance
Clean the outside of the scanner with a mild
detergent.
To prevent scratches, do not use abrasive
cleaners or solvents. Be careful not to rub the
LCD window.
Do not use excessive amounts of water.
Repairs
Do not attempt any repair. The scanner contains no
user serviceable parts. Contact the Uniden
Customer Service Center or take it to a qualified
repair technician.
Birdies
All radios can receive “birdies” (undesired signals). If
your scanner stops during Scan mode and no sound
is heard, it might be receiving a birdie. Birdies are
internally generated signals inherent in the
electronics of the receiver.
Press L/O to lock out the channel, then press Scan
to resume scanning.
If you have Internet access, you can visit
http://www.uniden.com.au or
http://www.uniden.co.nz for additional information.
UBC93XLT Paper OM.fm Page 51 Monday, May 14, 2007 9:01 AM