Filter
Top Products
6
Feature Highlights
• Pre-programmed frequencies specic to each
• Pre-programmed Trunked frequencies
• Close Cal ™ RF Capture Technology
You can set the scanner so it detects and provides information about nearby
radio transmissions.
• Pre-programmed Service Scanning by the following service banks;
- Police
- Rail Roads
- Aircraft (except Aeronautic radio Navigation (108-117.9875MHz)
- Marine Band
- UHF CB Radio
- AM CB Radio
• Trunk Tracking – Follow VHF High Band UHF 800MHz trunked public safety and
public service systems just as if conventional two-way communications were used.
• Multi-Track
– Track more than one trunking system at a time.
Scan conventional and trunked systems at the same time.
• 250 Channels – Program one frequency into each channel. You must have at least
one channel programmed to use the Scan mode.
• 12 Bands – Includes 12 bands, with aircraft and 800 MHz.
• 5 Banks– 5 banks with 50 channels each are useful for storing similar frequencies to
maintain faster scanning cycles or for storing all the frequencies of a trunked system.
• 25 MHz-1300 MHz– Indicates the range of frequencies that can be searched within the
bands of your scanner.
Note: The frequency coverage is not continuous.
• 5 Priority Channels– You can assign one priority channel in each bank. Assigning a
priority channel allows you to track activity on your most important channel(s) while
monitoring other channels for transmissions.
You can also assign trunking priority talkgroups.
• Data Skip – Allows your scanner to skip unwanted data transmissions and
reduces birdies.
• Direct Channel Access – Go directly to any channel without entering
programming mode.
• Turbo Search– Increases the search speed to 300 steps per second. This applies only
to transmission bands with 5 kHz steps.
• PC Programmable – Allows you to easily program all frequencies and Trunking Talk
Groups into your UBCT9 through the Uniden UBCT9-SS programming software
running on your PC.
UBCT9 OM 6 12/11/07 3:52:26 PM