Valcom VIP-800 Network Router User Manual


  Open as PDF
of 7
 
1
VIP-800
NETWORKED PAGING ZONE EXTENDER
SPECIFICATIONS
Access Methods
· PABX (VIP-820 connected to a station port)
· VIP-110 Easy PC paging software
· VIP-810 plus POTS phone
· 600 Ohm Supervised Page Port
· Any of Valcom’s distributed amplified
one-way paging units (V-2003A, V-2006A,
V-2924A)
Features
· RJ45 for network connection
· Front panel activity LED
· Network activity LED’s on RJ45
· Provides audio for up to 150 Valcom
one-way amplified speaker assemblies
· Background music input
· Contact closure or VOX operation of input
· Removable screw terminal connectors provided
for both inputs and outputs
· Page with music output, music mutes
during page
· Output control contact closure provided during
paging output
· May be used with 25 or 70 Volt amplifiers
· 2.5mm jack for DC power (115VAC TO 24VDC
adapter provided)
· NOTE: Even after assigning a static ID address the
unit will not respond to a “Ping” test.
Dimensions/Weight
· 1.88" H x 5.50" W x 4.15" D
(4.78cm H x 13.97cm W x 10.54cm D)
· Weight: 0.55 lbs. (0.25 kg)
Nominal Specifications
Input Impedance: 600 Ohms
Input Level: -10dBm nominal
Voice Switch Sensitivity: -21dBm
Music Source Input Impedance: 8 to 600 Ohms
Music Input Level: -10dBm nominal
Output Impedance: 8 Ohms
Output Level: -10dBm nominal
Nominal Power Requirements
Voltage: 24VDC
Current: 325mA
Environment
Temperature: 0 to +40 Degrees C
Humidity: 0 to 85% non-precipitating
947051
INTRODUCTION
The VIP-800 enables voice access to a single zone of
one-way paging over an IP-based LAN/WAN. This will
allow page zone extension anywhere on the network.
next