Filter
Top Products
3
CONNECTIONS
PABX Access
When using the VIP-800 with an electronic key
system C. O. line position or PABX trunk port, a
VIP-810 must be used to interface the telephone
system with the network.
When using the VIP-800 with a PABX station port,
a VIP-820 must be used to interface the telephone
system with the network.
Operation
Press line key (electronic key system) or dial trunk
access code (PABX) to connect to the paging
speakers. Make announcement. The VIP-800
automatically disconnects from page when you
hang up.
Page Port Access
When accessing the VIP-800 from a telephone
system page port, either VOX or switch closure may
be used to activate the unit.
Operation
Follow the telephone system manufacturer’s
instructions for access to external paging. Make the
announcement and hang up. The VIP-800
automatically disconnects from page.
The VIP-800 voice switching circuit is activated
when the person making the page begins to speak.
When the page is completed or the person stops
speaking for more than two seconds, the paging
circuit turns off. Other functions of the unit remain
the same.
Background Music
Background music may be connected to the VIP-
800 when using either access method. Background
music mutes when a page is made. Background
music is specific to each unit.
Connect the output of a low level music source to
the screw terminals marked “Music” on the input
terminal strip on the VIP-800. Adjust music volume
control on the music source to the desired level.
Volume Adjustments
The page volume is set by the speakers. Adjust
speakers 1/3 - 1/2 volume initially, test and reset if
necessary for correct page volume.