Filter
Top Products
3-10 Aluminum Mobile Rack
To insert the Mobile Rack drive case:
1. Insert the Mobile Rack drive case (with drive installed) into the installed Mobile
Rack
docking case and push firmly until the drive is seated.
2. Insert the key and turn it right to lock.
The
LED on the Mobile Rack should
light
after a slight delay. The installed Mobile Rack device is ready to use.
To
remove the Mobile Rack drive case:
1. Insert the key and turn it left to unlock.
Note
that the power LED on the
Mobile
Rack should now be OFF.
2. Gently pull on the Mobile Rack handle to slide the drive case out.
WARNIN
G
• DO NOT remove the drive case while the drive is working.
Damage
to data may result.
• The Key-Lock must be in the Lock position while in use.
Key-Lock in
Lock
Position
Key-Lock in
Unlock
Position
3-3 Using the Mobile Rack