Filter
Top Products
(Figure 5-E)
(Figure 5-H)
8
Installation
5. Tighten the screws to ensure EZ Swap 4 is secure
to the case. (Figure 5-E)
6. Plug one side of SATA cable into a SATA port on
the motherboard, plug the other side into the
EZ Swap 4. (Figure 5-F & 5-G)
7. Connect the 4 pin power cable to the EZ Swap 4's
power connector. (Figure 5-G)
8. Reassemble the case and reconnect the power
cable of the computer. (Figure 5-H)
(Fi
gure 5-F)
(F
igur
e 5-G)
SATA
Power Cable
SATA Cable