Filter
Top Products
4
Installing the SATA/IDE-USB Adapter for internal use with 2.5” IDE Hard Drive:
1. Open computer case.
2. Connect the smaller 44-pin IDE connector of the SATA/IDE-USB
Adapter to the hard drive.
3. Connect 2.5” Power Cable Adapter to SATA/IDE Adapter. Connect a
4-pin power connector from power supply to 2.5” HDD Adapter.
(Do not need to use supplied power adapter for internal use)
4. Connect USB connector of SATA/IDE-USB Adapter to an available
internal or external USB port.
5. Close computer case.
Installing the SATA/IDE-USB Adapter for internal use with 3.5”/5.25“ IDE Drive:
1. Open computer case and find an available 3.5”/5.25” bay.
2. Insert drive and mount with screws.
3. Connect the larger 40-pin IDE connector of the SATA/IDE-USB Adapter
to the hard drive.
4. Connect a 4-pin power connector from power supply to hard drive.
(Do not need to use supplied power adapter for internal use)
5. Connect USB connector of SATA/IDE-USB Adapter to an available
internal or external USB port.
6. Close computer case.
2.5” IDE HDD
3.5” IDE HDD