Figure 14 Erase RAID Configuration Data
Rebuilding Virtual Disk
Note: The 2+1 SATA 6G & PATA PCI-E COMBO HOST CARD
WITH RAID BIOS supports manual rebuilding of RAID 1 virtual
disks. The rebuild process is both initiated and complete in the BIOS.
The Marvell RAID Utility (MRU), which runs in an OS environment,
cannot be used to either initiate, resume, or complete the rebuild
process. Spare physical disks are not supported.
To manually rebuild a RAID 1 virtual disk
UGT‐IS602R Page19
1. When a virtual disk is degraded, the Status of a virtual disk is