Filter
Top Products
UGT‐IS602R Page27
below.
1. Follow Microsoft’s Windows installation procedure.
2. At the Windows Setup screen, press F6 to install the driver.
3. When prompted, press S to specify the location of the driver.
4. Insert the floppy disk, then press Enter.
5. Scroll to Marvell shared library (install first) using the arrow
keys and press Enter to select.
6. Press S again to select the second device.
7. Scroll to Marvell 91xx SATA Controller 32bit Driver and press
Enter to select.
8. Press Enter to complete the installation of drivers.
9. Continue with the Windows OS installation.
10. And there is an additional device Marvell 91xx Config SCSI
Processor Device is detected when Windows starts for the first
time.
11. Please insert the CD driver bound with 2+1 SATA 6G & PATA
PCI-E COMBO HOST CARD WITH RAID into your CD-ROM
Drive.
12. At the Windows desktop, click Start, then Run.
13. Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click