Filter
Top Products
UGT‐IS602R Page32
For An Existing Installation
1. Please insert the CD driver bound with 2+1 SATA 6G & PATA
PCI-E COMBO HOST CARD WITH RAID into your CD-ROM
Drive.
2. At the Windows desktop, click Start, then Run.
3. Type D:\UGT-IS602R\XP_2003_Vista_2008_7\Setup.exe, click
OK. (Change D:\ to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.
5. Restart Windows to complete the installation.
For Windows® Vista-x64/2008-x64/7-x64
For A New Installation
1. Follow Microsoft’s Windows installation procedure.
2. At the Windows Setup screen, press Load Driver to install the
RAID driver.
3. Insert the CD driver bound with2+1 SATA 6G & PATA PCI-E
COMBO HOST CARD WITH RAID into your CD-ROM Drive,
please select Marvell 91xx SATA 6G Controller
(D:\UGT-IS602R\XP_2003_Vista_2008_7\Floppy64\mv91xx.inf),
then press Next. (Change D:\ to match your CD-ROM drive