Vidikron 30 Projector User Manual


 
Controls and Functions
8 Vidikron Vision 30 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
8. LAMP MODULE COVER
Remove this cover to access the lamp compartment.
9. FRONT/REAR ADJUSTERS
Use these to adjust the projector height or projection angle.
10. CEILING MOUNT HOLES
Use these to attach the ceiling bracket to the projector.
2.2
Vision 30 Connector Panel
To access the connector panel, press
the door release button so it pops out.
Turn the knob clockwise or
counter-clockwise and pull gently on it
to open the door.
Figure 2-3 shows the Vision 30 connector panel.
Figure 2-3. Vision 30 Connector Panel
1. S-VIDEO
A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS
(S-VHS) VCR.
2. 12-VOLT (250 mA) TRIGGER OUTPUT (3.5-mm, mini phono jack)
Connect this to a a retractable screen, screen mask or other 12-volt trigger-activated
equipment.
3. COMPOSITE VIDEO INPUT
Standard composite video input for connecting a VCR, laser disc player or other
composite video source.
4. COMP 1 (RCA connectors)
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for
component video from sources such as DVD players.