Filter
Top Products
Installation
16 Vidikron Vision 30 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the Vision 30 installation process. The sections following
this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, Refer to
page...
1
Choose a location for the projector 17
2
Mount the projector 20
3
Install CineWide anamorphic lens base plate
(Vision 30/CineWide and Vision 30ET/CineWide only)
21
4
Connect signal sources to the Vision 30 22
5
Connect external controller to RS-232 port (optional) 26
6
Connect 12-volt trigger output to retractable screen or other,
+12-volt trigger-activated equipment (optional)
27
7
Apply power to the projector 27
8
Change the OSD Language (optional) 28
9
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
28
10
Primary lens adjustments: projected image size (zoom) and
focus
28
11
Install CineWide anamorphic lens
(Vision 30/CineWide and Vision 30ET/CineWide only)
29
12
CineWide lens adjustments: position, angle, geometry and
focus
30
13
Projector calibration: adjust the following for each input; save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
41 through 47
Note