Filter
Top Products
Vidikron Vision 30 Series Owner’s Operating Manual 33
PRE
L
IMINAR
Y
4.1
Selecting Video Memory
• Press the MEM1 button on the remote control to
recall settings for the current input from the
“Custom 1” memory preset.
• Press ISF NT (Night) to recall settings for the current input from the “ISF Night” memory
preset.
• Press ISF DAY to recall settings for the current input from the “ISF Day” memory preset.
• Press DEF to recall the factory-default settings for the current input. An on-screen
confirmation message appears. Press DEF again to confirm.
4.2
Selecting an Aspect Ratio
Use these buttons to select the appropriate aspect ratio
for the type of program material being viewed. For
more information on aspect ratios, refer to Table 4-1.
4.3
Selecting An Input Source
When you turn on the Vision 30, it switches to the last
selected input and looks for a valid signal.
Use these buttons on the remote control to select an
input source directly.
4.4
Using Picture-In-Picture
and Picture-By-Picture
(PIP/PBP)
For PIP and PBP purposes, there are two groups of
inputs separated by their display modes:
• Video (SD) group: Video, S-Video and
Component
1 inputs.
• Graphic (HD) group: HDMI and Component 2/RGB inputs.
PIP and PBP show one input from the Graphic group within or beside one input from the
Video group respectively.
• Press PBP to enable the PBP function. Press PBP again to switch the screens left to right.
Press PBP again to turn PBP off.
• Press ACTIVE to switch to the active window. (You can only switch inputs in the active
window.)
• Press PIP to enable the PIP function. Press PIP again to switch the main window. Press PIP
again to turn PIP off.
• To adjust the size of the PIP window, press PIP+ or PIP-.
• Adjust the position of the PIP window with the arrow buttons ( , , , ).
4Operation