Filter
Top Products
Vidikron Vision Model 15 Installation/Operation Manual 61
7.1
Vision 15 Specifications
Table 7-1 lists the Vision 15 specifications.
7Specifications
Table 7-1. Vision 15 Specifications
Projector Type: Digital Light Processing (DLP), Single-Chip DMD
Native Resolution: 1280 x 720 (16:9)
Aspect Ratios: 4:3, Letterbox, 16:9, IntelliWide, Cinema, IntelliWide 2.35
Video Standards: NTSC, PAL, SECAM
Video Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Scan Frequency: Horizontal: 15 - 91 kHz
Vertical: 24 - 85 Hz
Picture Size (16:9 Screen): Recommended Width: 72 in. (1.83 m) to 120 in. (3.05 m)
Throw Distance
(Factor x Screen Width):
Refer to Table 3-3
Horizontal and Vertical Offset
(when projector is inverted):
Refer to Table 3-4
Lamp: 230 Watts
Estimated Lamp Life: 2000 hours
Video Inputs: (1) Composite
(1) S-Video
(1) RCA Component (YPbPr)
(1) DVI-I
(1) HDMI with HDCP
Control Options: - Discrete IR remote
- Serial commands via RS-232
RS-232 Communication
Parameters:
9600 bps, no parity, 8 data bits, 1 stop bit, no flow control
+12V Output: Max. 0.25 Amps, active when Cinema or IntelliWide 2.35 Aspect
Ratio is selected (Vision 15ET/CineWide only) or when projector
is turned on;
Tip = +12V; Sleeve = Ground
Power Requirements: 100 to 240 VAC (auto-sensing), 50/60 Hz, 330 Watts
(1126.3 BTUs/hour)
Operating Environment: 41°F to 95°F (5°C to 35°C), 0% to 90% humidity
(non-condensing)
Dimensions: Vision 15: See Figure 7-1
Vision 15ET: See Figure 7-2
Weight (including lens): Vision 15: 30.1 lbs. (13.65 kg)
Vision 15ET: 30.8 lbs. (13.97 kg)