ViewSonic 300 Projector User Manual


 
ViewSonic PJ750 7
Cabling
Refer to the table below for connecting each terminal of the projector to each device.
Table 2: Cabling
CAUTION
An incorrect connection may result in fire or electric shock. Be sure to read this manual before
connecting the projector.
Be sure to turn off all devices to be connected before you connect the projector.
The cables may have to be connected with their core set to the projector’s side. Only connect the
cable supplied with the projector or those specified.
NOTE:
Before you connect the projector, be sure to read the manual of the respective device to be
connected. Make sure the projector is compatible with the devices.
Secure the screws of the connectors and tighten them.
The optional Mac adapter may be necessary for certain RGB input modes.
Certain computers may be provided with multiple display modes. The use of such modes may not
be possible with this projector.
Function Terminal Cable
Analog RGB input
RGB IN 1
Accessory or optional RGB cable with D-
sub 15-pin shrink jack and inch thread
screws.
RGB IN 2
Analog RGB output
RGB OUT
Audio input
(from the computer)
AUDIO IN [RGB 1]
(interlocked with RGB IN 1)
Optional audio cable with stereo mini-jack
AUDIO IN [RGB 2]
(interlocked with RGB IN 2)
PS/2 mouse control
CONTROL
Accessory PS/2 mouse cable
ADB mouse control Optional ADB mouse cable
Serial mouse control Optional serial mouse cable
RS/232C communication Optional RS-232C mouse cable
USB mouse control
USB
Optional USB cable
S-video input
S-VIDEO
Optional S-video cable with mini DIN 4-pin
jack
Video input
VIDEO
Optional video/audio cable
Component video input
COMPONENT VIDEO Y
Accessory component video cable
COMPONENT VIDEO C
B
/P
B
COMPONENT VIDEO C
R
/P
R
Audio input
(from video equipment)
AUDIO IN L
Optional video/audio cable or optional
audio cable with RCA jack
AUDIO IN R
Audio output
AUDIO OUT
Optional audio cable with stereo mini-jack