Filter
Top Products
5
ViewSonic G70m/G70mb
E
N
G
L
I
S
H
Using the Monitor
Setting the timing mode is important for maximizing the quality of the screen
image and minimizing eye strain. The timing mode consists of the resolution
(example 1024 x 768) and refresh rate (or vertical frequency--example 75
Hertz). After setting the timing mode, use the OnView
®
controls (pages 7-9) to
adjust the screen image.
The recommended timing mode for this monitor is:
VESA
®
1024 x 768 @ 75Hz
To set the Timing Mode:
1 Set the resolution: Right-click on the Windows
®
desktop > Properties >
Settings > Desktop Area > set the resolution.
2 Set the refresh rate: See your graphic card's user guide for instructions.
NOTE: To minimize the adjustments required for an optimal screen image,
select a timing mode from the Preset Timing Modes table below.
Preset Timing Modes
VGA 640 x 400 @ 70Hz
VESA 640 x 480 @ 75, 85Hz
VESA 800 x 600 @ 75Hz
VESA 800 x 600 @ 85Hz
VESA 1024 x 768 @ 60, 75, 85Hz
VESA 1280 x 1024 @ 60 Hz
Macintosh
®
640 x 480 @ 67Hz
Macintosh 832 x 624 @ 74.6Hz
Macintosh 1024 x 768 @ 75Hz
WARNING: Do NOT set the graphics card in your computer to exceed the
maximum refresh rate for each resolution (see below). Doing so may result in
permanent damage to your monitor.
Maximum Refresh Rates
(NI= Non Interlaced)
Using the Monitor
Setting the Timing Mode
1280 x 1024 NI @ 66Hz
1024 x 768 NI @ 87 Hz
800 x 600 NI @ 110Hz
640 x 480 NI @ 120 Hz