Filter
Top Products
ViewSonic
41
PJ758/PJ759/PJ760
Item Description
AUTO OFF
Using the ▲/▼ buttons adjusts the time to count down to
automatically turn the projector off.
Long (max. 99 minutes)
Ù
Short (min. 0 minute = DISABLE)
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons
is pressed or one of the commands (except get commands) is
transmitted to the CONTROL port during the corresponding time,
projector will not be turned off.
Please refer to the section “Turning off the power” (
15).
LAMP TIME
The lamp time is the time counted after the last resetting. It is
shown in OPTION menu as the usage time of the lamp.
Pressing RESET button or the ► button displays a dialog.
To reset the lamp time, select RESET using the ▲ button.
RESET
Õ
CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Lamp" (
51).
FILTER TIME
The fi lter time is the time counted after the last resetting. It is shown
in the OPTION menu as the usage time of the air fi lter.
Pressing the RESET button or the ► button displays a dialog.
To reset the fi lter time, select the RESET using the ▲ button.
RESET
Õ
CANCEL
•
Please reset the fi lter time only when you have cleaned or replaced
the air fi lter, for a suitable indication about the air fi lter.
• For the air fi lter cleaning, see the section "Air fi lter" (
53).
OPTION Menu
OPTION Menu (continued)
(continued on next page)