Filter
Top Products
ViewSonic
42
PJ758/PJ759/PJ760
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1 and 2 on the remote control (
6).
Choose 1 or 2 on the MY BUTTON menu using the ◄/► button
fi rst. Then using the ▲/▼ buttons sets one of the following functions
to the chosen button.
• COMPUTER1: Sets port to COMPUTER IN1.
• COMPUTER2: Sets port to COMPUTER IN2.
• COMPONENT: Sets port to COMPONENT(Y, Cb/Pb, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
•
INFORMATION: Displays a dialog of INPUT INFORMATION
(
44).
• AUTO KEYSTONE EXECUTE:
Performs automatic keystone distortion correction (
34).
• MY MEMORY:
Loads one of adjustment data stored (
27).
If you want to keep the current adjustment, please press the ◄
button to quit. Otherwise the current adjusted condition will be lost
by loading a data.
• PICTURE MODE: Changes the PICTURE MODE (
24).
• FILTER RESET:
Displays the fi lter time reset confi rmation dialogue (
41).
• VOLUME+: Set the volume up.
• VOLUME-: Set the volume down.
SERVICE
Selecting this item displays the SERVICE menu.
Select an item using the ▲/▼ buttons, and press the ► button or
the ENTER button to execute the item.
FAN SPEED
Ù
AUTO ADJUST
Ù
GHOST
Ù
FILTER MESSAGE
Ù
KEY LOCK
FACTORY RESET
Ù
I NFORMATION
Ù
REMOTE FREQ.
FAN SPEED
Using the ▲/▼ buttons switches the rotation
speed of the cooling fans. The HIGH is the mode
for use at highlands etc. Note that the projector is
noisier when the HIGH is selected.
HIGH
Ù
NORMAL
OPTION Menu (continued)
OPTION Menu
(continued on next page)
When the current adjustment
is not saved to memory a
dialog is displayed.
When no data is saved
in memory, a dialog is
displayed.