Filter
Top Products
45
Function Description
Color Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 31 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 32
for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 33 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 33 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 33 for details.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 33 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 33 for details.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 33 for details.
Color
Temperature
See "Selecting a Color Temperature" on page 33 for details.
Save Settings
Saves the settings made for the User 1 or User 2 mode.
2. PICTURE menu