Filter
Top Products
43
Function Description
Color Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a
picture mode" on page 29 for details.
Reference
Mode
Selects a picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See "Setting the User 1/User 2 mode" on page 30
for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on
page 31 for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See "Adjusting Contrast" on page 31 for details.
Color
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 31 for details.
Tint
Adjusts the red and green color tones of the image. See "Adjusting
Tint" on page 31 for details.
The function is only available when Video or S-Video with NTSC
system is selected.
Sharpness
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 31 for details.
Brilliant Color
Adjusts white peaking while maintaining correct color presentation.
See "Adjusting Brilliant Color" on page 31 for details.
Advanced
Noise Reduction
See "Reducing image noise" on page 31 for details.
Gamma
See "Selecting a gamma setting" on page 31 for details.
Color Temperature
See "Selecting a Color Temperature" on page 32 and "Setting a
preferred color temperature" on page 32 for details.
Save Settings
Saves the settings made for the User 1 or User 2 mode.
2. PICTURE menu