Visioneer 1770 Fax Machine User Manual


 
52
CHAPTER SEVEN
Multiple Resolution Transmission
Use this feature to select separate resolution settings for each page of the fax
you're sending. This could be useful if you're sending a fax with photos and
letters, or some pages with small print and others with normal print. Resolution
settings return to STANDARD after the fax is sent.
1
Insert documents in feeder, then press
Function
,
1
,
5
.
2
Use or to select resolution for page 1, then press
Set
.
3
Repeat Step 2 for subsequent pages. Press
Stop
when you're finished.
4
Enter the fax number you're calling, and press
Start
.
Receiving Faxes
Operation from Extension Telephone
If you answer a fax call on an extension phone, you can make your fax machine
take over by using the Activation Code. When you press the Activation Code
5
1
, the fax machine starts to receive a fax.
If the fax machine answers a voice call and double-rings for you to take over, use
the Deactivation Code
5
1
to take the call at an extension phone.
If you answer a call, and no one is on the line, assume you’re receiving a fax. At
the fax machine phone, press
Start
, then hang up. At an extension phone, press
5
1
, wait for fax receiving tones (chirps), then hang up. (Your caller will
have to press
Start
to send the fax.)
For F/T (Fax/Tel) Mode Only
When the machine is in F/T mode, it will use the F/T Ring Time (double ringing)
to alert you to a voice call. If you’re at the fax machine, you can lift the handset
to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T
Ring Time and press
5
1
between the double rings. If no one is on the
line, or if someone wants to send you a fax, send the call back to the fax machine
by pressing
5
1
.
See
F/T Ring
Time
p. 38
See
Easy Receive
p. 36