Filter
Top Products
5 USB SCANNER INSTALLATION GUIDE
C
ONNECTING
THE
S
CANNER
A
FTER
I
NSTALLING
THE
S
OFTWARE
Your USB scanner connects to any available USB port. Check your
computer’s manual for the USB port location.
To connect the USB scanner:
1. Plug the scanner end of the USB cable into the USB port on the
back of the scanner.
If the plug does not attach easily, make sure that you are plugging it
in correctly. Do not force the plug into the connection.
Note: You do not have to shut off the power to your computer when
connecting the scanner.
Note: If you have not installed the software yet, unplug the cable
from the computer and install the software now. When the software
installation is complete a message tells you to connect the scanner.