Filter
Top Products
TL-WN727N Wireless Lite-N USB Adapter User Guide
- 26 -
Chapter 5 AP Mode
Click the icon to switch to AP Mode. In this mode you can use the TL-WN727N as a soft AP.
Figure 5-1
5.1 Config
Here you can do some basic configurations.
Figure 5-2 Config Setting Page
SSID – Enter the SSID of your soft AP, or you can press “<- Use Mac Address” button to keep
the Mac Address as your SSID.
Channel – Select the channel from the drop-down list
. This field determines which operating
frequency will be used.
Beacon – Enter a value between 20-1000 milliseconds for Beacon Interval here. The beacons are
the packets sent by the router to synchronize a wireless network. Beacon Interval value
determines the time interval of the beacons. The default value is 100.