TL-WN727N Wireless Lite-N USB Adapter User Guide
- 27 -
TX Power –Manually force the AP’s transmitting power. System default is 100%.
Idle Time - Manually force the Idle Time using a selected value. The default is 300.
5.2 Access Control
Click the Access Control tab of the utility and the Access Control screen will appear as Figure
5-3. In this page, you can enable/disable the AP to connect with the specified Mac address.
Figure 5-3 Access Control Function
Access Policy – This field allows you to start the function or not. System default is disabled.
• Disable - Disable the Access Policy feature.
• Allow All - Allow all the MAC addresses in the Access List to access the AP.
• Reject All - Disable all the MAC addresses in the Access List to access the AP.
Mac Address – Manually force the Mac address using the function, and press Add to Access
List.
Access List – Display all Mac Addresses that the user has set.
5.3 Mac Table
Figure 5-4 shows the link status page. It displays detailed station information of current
connection.