Wells-Gardner D9410 Series Computer Monitor User Manual


 
Wells-Gardner Electronics Corporation
Picture Tube.
Size: 27V Regular and Flat size to customer requirement
Dot Pitch: .83mm
Signal Input.
Video Input: Analog, Positive Signal 4 / 2.2Volts CGA (0.7V p-p)VGA
Horizontal Sync: TTL Level, Positive or Negative Pulse
Scanning : 15.75 KHz-50KHz
Vertical Input: TTL Level, Positive or Negative pulse
Scanning : 40-100Hz
Power Supply.
Power Input : 90-240 VAC, 50/60Hz
Fuse Rating: 250V, 3.15A
Power Consumption
Normal : less than 150W
OSD (On Screen Display) Control:
Operating Temperature: 0°C - 55°C
Operating Humidity: 10% - 90% (Noncondensing)
Net Weight : 17kg (37lbs) Standard frame
TECHNICAL FEATURES:
Microprocessor control with OSD (On screen display menu).
Microprocessor recognizes the input computer signal and signal output from the
customer control board connected to the main board by a flat cable.
Universal AC Input Voltage.
Power supply operates on 90-240 VAC at 60/50Hz for use all over the world.
A (NO SIGNAL IN) message is displayed on the screen if no signal is present
at the signal-input cable while the monitor is powered on.
Control panel.
If you require different display characteristics other than the factory mode presets
of size, position, color settings, use the control panel to program it to your
requirements in each resolution mode. These adjusted settings are kept in memory
even if you change resolution mode or turn off the monitor.