Filter
Top Products
Xerox Nuvera
®
100/120/144 EA Digital Production System - Customer Expectations Document
- 39 -
Printer Module Capabilities
• Print to Edge
This is not a print to edge system due to potential image quality defects on the edge of the page.
The system default is set to 3 mm border erase. The border erase can be set to 0 mm, but the
printer is subject to image quality limitations - which may be acceptable for some applications.
Some non-standard and custom paper sizes may have a larger border region where image quality
cannot be optimized.
• SRA3 Printing
Printing on SRA3 can result in inboard and outboard edge image quality defects. The defects can
range from slight mottle to high contrast deletions depending on the type and condition of the
substrate being printed on. The reason for this is that the Transfer Assist Blade does not completely
extend to the edges of SRA3 substrates. The blade does not make contact with the last 14mm at
both the inboard and outboard edges of SRA3 substrates.
• Area Coverage
The system is capable of continuous printing of pages up to 25% area coverage. When documents
that exceed 25% area coverage per page are continuously printed, the customer may notice that
the system does not print at the rated speed.
• Xerographic Color Prints
Xerographic color originals cannot be run through the fuser.