Filter
Top Products
Tape Client overview
1-6 Tape Client Job Submission Guide
Job recovery
If a Tape Client crash occurs during tape processing, it recovers
to its last known state at the start of a file. The Tape Client
maintains a file that contains all the information needed to
recover from a rollover. The job is always recovered to the start,
not the middle, of a file.
The Tape Client makes two attempts to recover. If it is not able to
do so, a message is displayed and the Tape Client reverts to its
initial state.
If the tape volume that is currently loaded is not the one that is
needed for recovery, or if the Tape Client cannot determine if it is,
you are prompted to load the correct volume. When you load the
requested tape, the file is sent from the beginning. (This could
cause some pages to be reprinted.)
If the job that is currently being received is canceled at the
controller, the Socket Gateway closes the connection to the Tape
Client. The Tape Client stops reading the data and rewinds or
unloads the tape if requested.
In case of a system crash during printing, the Tape CLient
detects a communication error and aborts the job. AFter a
restart, DocuSP will continue to print the data that has been
transferred and processed.