Filter
Top Products
10_Safety
WARNING: The metallic surfaces in the fuser
area are hot. Please use caution when removing
paper jams from this area and avoid touching any
metallic surfaces.
Do Not Do These:
• Never use a ground adapter plug to connect the equipment
to a power outlet that lacks a ground connection terminal.
• Never attempt any maintenance function that is not
specifically described in this documentation.
• Never obstruct ventilation openings. They are provided to
prevent overheating.
• Never remove covers or guards that are fastened with
screws. There are no operator serviceable areas within
these covers.
• Never locate the machine near a radiator or any other heat
source.
• Never push objects of any kind into the ventilation openings.
• Never override or "cheat" any of the electrical or mechanical
interlock devices.
• Never place this equipment where people might step on or
trip on the power cord.
• This equipment should not be placed in a room unless proper
ventilation is provided. Please contact your local Authorized
dealer for further information.
Electrical Safety Information
1. The power receptacle for the machine must meet the
requirements stated on the data plate on the rear of the
machine. If you are not sure that your electrical supply
meets the requirements, please consult your local power
company or an electrician for advice.
2. The socket outlet shall be installed near the equipment and
shall be easily accessible.
3. Use the power cable that is supplied with your machine. Do
not use an extension cord or remove or modify the power
cord plug.
4. Plug the power cable directly into a correctly grounded
electrical outlet. If you are not sure whether or not an outlet
is correctly grounded, consult an electrician.
5. Do not use an adapter to connect any Xerox equipment to
an electrical outlet that lacks a ground connection terminal.
6. Do not place this equipment where people might step or trip
on the power cable.
7. Do not place objects on the power cable.
8. Do not override or disable electrical or mechanical interlock
devices.
9. Do not push objects into slots or openings on the machine.
Electrical shock or fire may result.
10. Do not obstruct ventilation openings. These openings are
used to provide proper cooling to the Xerox machine.
Electrical Supply
1. This product shall be operated from the type of electrical
supply indicted on the product's data plate label. If you are
not sure that your electrical supply meets the requirements,
please consult a licensed electrician for advice.
WARNING: This equipment must be connected
to a protective earth circuit. This equipment is
supplied with a plug that has a protective earth
pin. This plug will only fit into an earthed electrical
outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact a licensed
electrician to replace the outlet.
2. Always connect equipment to a correctly grounded power
outlet. If in doubt, have the outlet checked by a qualified
electrician.
Disconnect Device
The power cable is the disconnect device for this equipment. It is
attached to the back of the machine as a plug-in device. To
remove all electrical power from the equipment, disconnect the
power cable from the electrical outlet.
Emergency Power Off
If any of the following conditions occur, turn off the machine
immediately and disconnect the power cable(s) from the
electrical outlet(s). Contact anauthorized Xerox Service
Representative to correct the problem: