Filter
Top Products
Photo 18
Photo 19
Photo 15
Photo 20
Photo 21
Photo 17
Photo 16
4 Lexmark Optra E310 Technical Instructions
E-mail: info@futuregraphicsllc.com Website: www.futuregraphicsllc.com
Step 14
Remove the three screws that
h
old the wiper blade.
(See Photo 15)
Step 15
Lift out the wiper blade straight
up to remove.
Step 16
Grab the drum by the gears and
lift the drum out of the hopper.
Clean the drum using a lint free
cloth. (See Photo 16)
Step 17
R
emove the black gear from
the dev
elop
er r
oller axle.
(See Photo 17)
S
tep 18
Release the two clips that hold the devel-
oper roller end cap.
(See Photo 18 and 19)
Remove the end cap.
Step 19
Slide the developer roller out through the
side of the hopper.
(See Photo 20)
Clean the developer roller using a dry lint-
free cloth.
St
ep 20
R
emove the two screws that hold the
doctor blade.
(See Photo 21)
St
ep 21
Lift the doctor blade up. It may be neces-
sary to remove the small foam strips that
are connected to the back of the doctor
blade. Clean the doctor blade using
alcohol and a cotton swab.
Step 22
Apply a seal to the toner hopper.
Step 23
R
eassemble in reverse order.