Filter
Top Products
PREPARING FOR INSTALLATION
XEROX DOCUPRINT 4050/4090 IPS INSTALLATION PLANNING GUIDE 4-5
-2 Inspect and approve site. Xerox ________
Order consumable supplies. Minimum supplies
needed for installation:
• Paper (2 cartons)
• Developer (1 carton) No. 5R302
• Fuser lubricant (2 cartons) No. 8R983
• Dry ink (1carton) No. 6R301.
Note: After installation, you will need to
establish a procedure for ordering supplies
according to your ongoing production
requirements.
Chapter 4,
Appendix A and
sales rep
Customer and Xerox ________
-1 Schedule operator training. Systems analyst
(U.S.) or site
representative
(non-U.S.)
Customer and Xerox ________
Define parameters needed to configure PSF for
connectivity to the IPS printer.
Appendix D and
E
Customer ________
Install Make sure supplies are available. Chapter 4 and
Appendix A
Customer
Make sure system administrators are available
during software installation.
Customer ________
Provide host channel address and channel unit
address (if printing via channel).
Customer ________
Provide host IP address. Appendix D or E Customer ________
Sysgen your host to print to an AFP Type 1,
Group 3 printer.
Customer and Xerox ________
Set up Data Transfer Mode. Customer and Xerox ________
Install 4050/4090 IPS printer hardware and
software.
Xerox ________
Have operators available for training. Appendix E Customer ________
Check documentation and software kits for
completeness.
Customer ________
Have test jobs ready to run. Customer ________
Provide stocks needed for default input
configuration
Customer ________
Provide parameters needed to configure PSF
for connectivity to the IPS printer.
Appendix D or E Customer ________
Table 4-1. 4050/4090 IPS installation planning checklist
(continued)
Week Activity Reference Responsibility
Date
completed