Filter
Top Products
Page 15
Tray 5 Media
Protection
Tray 5 Media Protection option
By default, a job prints with the copier’s default media type, which is Plain, because the
default setting for the Media Type print option is Use Machine Settings. However, Tray 5
(Bypass) does not detect the media type actually loaded in the tray. If users load heavyweight
media in Tray 5, the copier still prints for plain media, which can damage the fuser.
The Tray 5 Protection option protects the fuser by automatically printing for Heavyweight 2
media for jobs that have all of the following conditions:
•Paper Source is Tray 5 (Bypass)
•Media type is not specified
• The copier media type is set to one of the following:
–Plain
–Recycled
–Plain (Side 2)
–Hole Punched
–Custom 1
–Custom 2
–Custom 3
–Custom 4
–Custom 5
If you want to print from Tray 5 (Bypass) for plain media, you must select Plain as the Media
Type for the job. Or, you can disable the Tray 5 Media Protection option.
You can set the Tray 5 Media Protection option in Fiery Server Setup, under the General
Setup tab. It is disabled by default.