Filter
Top Products
8
3 Press power button on Accxes® Controller.
Powering Off 6030/6050
Switch off the power following the steps below.
1 Switch OFF the Main Power Switch.
2 Switch OFF the Scanner Power Switch.
3 Switch the Circuit Breaker Switch to the
OFF position.
The 6050A will not operate unless
Accxes controller is ON.
Never switch off the power while the machine is printing. Failure to observe
this precaution may result in paper jams in the high-temperature areas of the
printer.
When the remote switch is set to
[Connect], and the Scanner Power
Switch is set to ON, the power to the
Printer and Scanner can be switched
on and off with the Main Power
Switch.
Switch off the Circuit Breaker Switch
if the machine will not be used for a
long period of time.
Main Power
Switch
Circuit Breaker
Scanner Power
Switch