Filter
Top Products
DOCUSP 3.x
XEROX DOCUMENT SERVICES PLATFORM SERIES 7
GETTING READY FOR THE DOCUSP INSTALLATION
instance the following data element, subnetwork mask, must
also be provided.
Subnet mask: The subnet mask is a decimal or hexadecimal
group of four fields, each separated by a decimal point, that
indicates how much of the IP Address is used with the Network
number to create subnets. The following is an example of a
subnet mask in its decimal and hexadecimal form.
255.255.0.0 = 0xff.0xff.0x0.0x0
The subnet mask is derived by the network administrator
according to how many subnets are needed. The subnet mask is
the same for all hosts that exist on a given network. Your
customer’s network administrator can provide this information.
Domain name for Domain Name Service: Enter the name of
the Domain Name Service server.
Server IP Address(es):Enter one or more IP addresses for the
Domain Name Service server. The IP address is a unique 4
byte, 32 bit numeric value. This information, along with the DNS
name, will be entered into the resolv.conf file during installation.
Geographic region: Enter your customer’s geographical region
The selections available are Africa, Western Asia, Eastern Asia,
Australia/New Zealand, Canada, Europe, Central America,
South America, United States, Other (offset from GMT), Other
(specify rules file).
Time zone: Enter your customer’s time zone. The selections
available are: Eastern, Central, Mountain, Pacific, Yukon,
East—Indiana, Arizona, Michigan, Samoa, Aleutian, Hawaii,
none of these (return to regional menu).
Default router lP address: The default router IP address is a
unique 4 byte, 32 bit numeric value, for example,13.252.12.198,
that identifies the machine that is acting as the main router. The
router maintains tables of addresses of many networks in order
to forward data packets between these networks. During install,
the service representative creates a default router file on the
controller, if one does not already exist, and this number is
added to a line in the new file. Your customer’s network
administrator should provide this number.
NOTE: If another machine is not identified as the default router
the controller will automatically take over the main router function
This may noticeably slow down processing on the network.