Filter
Top Products
XEROX DOCUMENT SERVICES PLATFORM SERIES 1
GETTING STARTED
Installation worksheets
The Getting Ready for the DocuSP Installation guide has been
developed for you to use in the gathering of technical data that
will be required by the Xerox personnel during installation of your
customer’s Document Services Platform hardware and software.
It is used in conjunction with the appropriate printer installation
planning guide.
Using the installation worksheets
The Xerox printer with DocuSP software provides a wide range
of network printing services on industry-standard networks, and
consists of the following:
· the DocuSP controller which is a UNIX-based computer
workstation with a Xerox interface PWB and DocuSP
software installed.
· A supported Xerox printer.
Getting Ready for the DocuSP Installation contains the
worksheets that must be completed to support the installation of
the Xerox DocuSP software on the controller.
When these worksheets are completed they will contain a record
of the state of the system at the time of install. Most likely, this
setup and configuration state will change, so encourage your
customer to keep these worksheets with the service record of
the printer for future reference.
Your customer should not complete the worksheets if they are
not sure of the required information. Always encourage them to
contact the next level of technical support within their
organization for assistance.
NOTE: Worksheet 5, the Novell NetWare gateway installation
worksheet, refers to on-site setup requirements that your
customer’s network administrator should already have
implemented prior to the DocuSP install. The values for the data
elements entered during that setup activity should be recorded
on this worksheet.