Filter
Top Products
4 Handling The Printer
92 8254E / 8264E User Guide
4.6.1.1.3 PF Adjust menu
Allows you to configure various settings on the Media feed compensation.
(1) Initial Print menu
Allows you to set up Initial Adjust Print.
(2) Initial Change menu
Allows you to set up Initial Adjust Change.
Setup item Setting Description
PF Initial Print Performs Initial Adjust Print.
• Pressing the [Enter] key shifts to the sub menu.
(1) Initial Print menu, immediately below
Initial Change Sets up Initial Adjust Change.
• Pressing the [Enter] key shifts to the sub menu.
(2) Initial Change menu, immediately below
Confirm Print Performs Confirm Print.
• Pressing the [Enter] key shifts to the sub menu.
(3) Confirm Print menu, immediately below
Micro Print Performs Micro Adjustment Print.
• Pressing the [Enter] key shifts to the sub menu.
(4) Micro Print menu, immediately below
Micro Change Active during printing operation.
Sets up Micro Adjustment Change.
• Pressing the [Enter] key shifts to the sub menu.
(5) Micro Change menu, immediately below
—
• Pressing the [Cancel] key shifts to the previous menu.
4.6.1.1.1 User media menu
Setup item Setting Description
Feed Length 100mm to <250mm> to
500mm
Changes the feed length of the media for the Initial
Adjust Print.
• Pressing the [Enter] key determines the setting.
"Printing" displays in the control panel and the
printing of the Initial Adjust Print begins.
After printing, "Ready to Print" displays in the
control panel.
—
• Pressing the [Cancel] key cancels the setting and
shifts to the previous menu.
4.6.1.1.3 PF Adjust menu
Setup item Setting Description
Init. 200.0mm to <250.0mm> to
300.0mm
Sets up Initial Adjust Change.
—
• Pressing the [Enter] key saves the setting and shifts to
the previous menu.
• Pressing the [Cancel] key cancels the setting and
shifts to the previous menu.
4.6.1.1.3 PF Adjust menu