Filter
Top Products
1 Safety Instructions
4 8254E / 8264E User Guide
Use the power cable that is supplied with your machine. Do not use an extension cord or remove or
modify the power cord plug.
Do not override or disable electrical or mechanical interlock devices.
Do not push objects into slots or openings on the machine. Electrical shock or fire may result.
The power cable is the disconnect device for this equipment. It is attached to the back of the machine
as a plug-in device. To remove all electrical power from the equipment, disconnect the power cable
from the electrical outlet.
Any operator product maintenance procedures will be described in the user documentation supplied
with the product.
Do not carry out any maintenance on this product which is not described in
the customer documentation.
Store all consumables in accordance with the instructions given on the package or container.
Keep all consumables away from the reach of children.
Wire the various cables as directed in the User Guide. Incorrect wiring could cause a fire.
Be sure to use the power cable(s) supplied with the printer. Using other power cables can cause an
electric shock or fire.
Make sure to use only the type of electrical power specified for your printer (AC 100 V - 120 V or
AC 220 V - 240 V). If other than the specified voltage is used, it could cause an electric shock or fire.
Plug the printer directly into the building’s electrical outlet (AC 100 V - 120 V or AC 220 V - 240
V). Do not plug multiple power supply cables into the same electrical outlet. Doing so could generate
heat and might cause a fire.
Be sure to use a dedicated building electrical outlet with a ground wire for the power supply, and
connect it to the ground wire. If the ground wire is not connected, an electric shock or fire may occur.
The waste fluid from the printer is industrial waste. Proper waste fluid disposal according to
industrial waste disposal laws and ordinances of your local government is required. Consign disposal
of waste fluids to a specialized processor.
Pay attention to the following points when handling the power cables.
• Do not put heavy objects on the power cables.
• Do not bend, twist or pull the power cables by force.
• Do not route the power cables near heating appliances.