Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 133
6. Measure the distance between the two plus marks (+) in the confirmation adjustment print, using a
ruler. Then, confirm that the measured distance matches the feed length when printing.
a. If the measured distance does not
match the feed length, follow the procedure from Steps 1
through 5 and re-adjust.
b. If the measured distance does
match the feed length, proceed to Step 7.
7. If you see banding or waves in the print, perform Micro adjustment printing.
a. Display the Media feed compensation menu in the control panel in the same way as in Step 1.
b. Press the [+] key or [–] key to select "PF4:Micro Print."
c. Press the [Enter] key. "Printing" displays in the control panel.
• Micro adjustment printing starts.