Filter
Top Products
4 Handling The Printer
166 8254E / 8264E User Guide
4.10.1.3 8254E Cutting media when the Media Cut menu is set to “Off”
1. Verify the following regarding the operational condition of the printer.
• Printing or other operations are not in progress.
• "Ready to Print" displays in the control panel.
2. If the roll media cut position is changed, refer to 4.8.1 Feeding media
and advance the roll media to
the desired cut position.
• Pay attention to the following points when you cut roll media. Mishandling the
razor blade may cause a cut on your finger or hand.
• When you hold media, do not place your finger on the media cut groove.
• Move the razor blade along the media cut groove.
3. Place a razor blade on the media cut groove on the media guide, and cut the roll media.
No. Name
1 Media guide
2 Media cut groove
3 Razor blade