Filter
Top Products
4 Handling The Printer
128 8254E / 8264E User Guide
g. Press the [>] key. "PF1: Initial Print" displays in the control panel.
• Proceed to Media feed compensation menu.
4.6.1.1.3 PF Adjust menu
2. Print the initial adjustment print.
• Media feed compensation and micro print adjustments reset to defaults each time
"Initial Print" is run.
a. Press the [Enter] key. "Feed Length: 250 mm" displays in the control panel.
• The length of media that is fed (i.e., the feed length) for initial adjustment
printing is normally set at 250mm.
• If you increase the feeding length, the accuracy of the Media feed
compensation improves.
• To change the feeding length, press the [+] key or [–] key and change the set
value.