Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 87
4.6.1 Setup menu (Setup item 1 of 7 total)
Allows you to set up the various configuration settings of the printer.
From the "Menu1: Setup>" display, press the [>] key. This takes you to the first sub-menu titled "Set1:
Media Type." Pressing the [-] and [+] keys allows you to increment up or down to each of the Setup items
in the left column below.
• Whether a specific sub menu of the Setup menu will actually be displayed is
determined by whether or not it has been selected in the Selection menu.
4.6.5 Selection menu (Setup item 5 of 7 total)
Setup item Description
MediaType Sets up the media type to print.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.1 MediaType menu
Effect Sets up the Effect menu.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.2 Effect menu
Flushing Sets up the Flushing operation while printing.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.3 Flushing menu
Side Margin Specifies the right and left margins of the printed media.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.4 Side Margin menu
Media Initial Specifies whether to perform media detection when initializing the media. This
detects the width and front edge of the media when initializing the media.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.5 Media Initial menu
Media Width If media detection is not performed during media initialization, this specifies the
media width between the loading mark and the left edge of the media.
If media detection is
performed during media initialization, this displays the
detected
media width.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.6 Media Width menu
Take-up Sets the operation of the optional winding unit.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.7 Take-up menu
Origin Sets the location at which the printing of the data begins (i.e., the origin).
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.8 Origin menu
Prev. Stick Sets up to prevent media from sticking when printing starts.
• Pressing the [Enter] key shifts to the sub menu.
4.6.1.9 Prev. Stick menu
8264E only - HeadFan Sets up head fan operation.
• Pressing the [Enter] key shifts to the sub m4.6.1enu.
4.6.1.10 8264E only - Head Fan menu