Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 113
4.6.1.27 Temporary menu
Temporarily displays all of the possible selections in the Setup submenus.
4.6.2 Test Print menu (Setup item 2 of 7 total)
Allows you to perform Nozzle Check of the print head, Mode Print, Palette Print and to print the Setup list.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel’s display. Pressing the [-] key once causes "Menu2: Test Print>" to display. (The > character after a
menu name indicates that there are sub-menus under that menu.)
From the "Menu2: Test Print>" display, press the [>] key. This takes you to the first sub-menu titled
"Test1: Nozzle Check." Pressing the [-] and [+] keys allows you to increment up or down to each of the
Setup items in the left column below.
• Refer to the following for the operation procedure of TestPrint.
3.6 Test printing
Setup item Setting Description
Temporary ALL On Displays all of the selections in the Setup submenus.
• Pressing the [Enter] key after "Temporary" is
displayed turns on all selections for the setup
submenus as long as you remain
in the setup sub
menus. (An asterisk * next to a selection indicates it
is turned on.)
• Pressing the [Cancel] key returns the Setup
submenus to their previous settings.
4.6.5 Selection menu (Setup item 5 of 7 total)
• The following item is never displayed
even when ALL On is selected.
•Feed
Setup item Description
Nozzle Check Performs the Nozzle Check printing.
Used to check whether there are any clogged heads, or missing or blurred prints.
3.6.2 Nozzle Check
Mode Print Allows Mode Print to be performed.
Used to confirm the following printing conditions.
• Print quality
•Effect
• Pre-Heater temperature
• Platen Heater temperature
• After Heater temperature
• Adjustment value
3.6.3 Mode Print