Filter
Top Products
5 Troubleshooting
8254E / 8264E User Guide 175
5.3 Error messages
This section describes messages displayed during normal printer operation or when errors occur, and
gives responses to the messages.
5.3.1 Status messages
This section describes status messages displayed during printer normal operation. When the printer is
operating correctly, each operational status is displayed in the control panel as below.
No. Display Description Reference
1 Ready to Print Standby (Media is loaded).
—
2 Media End Standby (Media is not loaded).
3.5 Media
handling
3 Receiving Receiving data.
—
4 Converting Analyzing data.
—
5 Printing Printing taking place.
—
6 Warming Up Warming up the heater.
—
7 Cleaning **% Cleaning the head.
Please wait a while.
6.3.3 Cleaning
the head
8 Start Ink Charge – >E Ink filling starts.
Press the [Enter] key.
6.2.1 Replacing
ink cartridges
9 Ink Refill **% Filling the ink. **% indicates how far along.
Please wait a while.
6.2.1 Replacing
ink cartridges
10 Washing Performing print head washing operation.
Please wait a while.
4.6.1.18 Head
Wash menu
11 Moving Origin Pos. The print head is moving to the original
printing position in the Origin setup menu.
Please wait a while.
4.6.1.8 Origin
menu
12 Confirm Position – >E The print head has finished moving to the
original printing position in the Origin setup
menu.
Press the [Enter] key.
4.6.1.8 Origin
menu
13 Remove Cartridges Displayed during head washing.
Remove the cleaning cartridges.
4.6.1.18 Head
Wash menu
14 ** Initialing ** Initializing the setting in the Initialization
menu.
Please wait a while.
4.6.1.20
Initialization menu
15 ** Press 2sec. ** The [Cleaning] key or the [Nozzle Check]
key was pressed for less
than two seconds.
Press the key for more
than two seconds.
2.3.4 Printer
control panel
16 Insert CleaningCart. Displayed during head washing.
Insert the cleaning cartridges.
4.6.1.18 Head
Wash menu
17 Insert InkCartridges Filling the ink.
Insert the ink cartridges.
6.2.1 Replacing
ink cartridges
18 8254E only - Transport Mode Preparing for transportation.
Please wait a while.
6.4.2
Transporting the
printer