Filter
Top Products
5 Troubleshooting
174 8254E / 8264E User Guide
(8) Images are cut off on the left side
(9) Parts of images are missing
No. Possible cause Remedy Reference
1 Improper image size sent to the printer.
If the "Set to Media" option is being
used in the RIP, the printer will try to
print an image with a width the same as
the width of the media specified in the
"Media size" form. It will be unable to
do so because of the required
minimum margins on the left and right
sides of the media.
Check the size of the image being sent to the
printer and allow for the default margins.
Or, specify a smaller media width in the RIP,
compensating for the margins.
No. Possible cause Remedy Reference
1 Missing part of an image can also be
caused by not factoring in the size of
the side margins when the image size is
set. Although the Media may
physically be wide enough, the actual
print area may not be.
The condition of the media plays a
large part also.
Check the size of the image being sent to the
printer and allow for the default margins.
Or, specify a smaller media width in the RIP,
compensating for the margins.