Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 109
4.6.1.18 Head Wash menu
Allows you to perform the HeadWash procedure.
• Make sure to use a dedicated cleaning fluid (Xerox P/N 108R00735).
4.6.1.19 CR Maintenance menu
Allows you to perform maintenance. Use this to clean the cleaning wiper and the outside of the print head.
6.3.4 Cleaning the cleaning wiper
6.3.5 8264E only - Cleaning around the print head
Setup item Setting Description
HeadWash Start Performs Head washing.
• Pressing the [Enter] key causes the Head washing
operation to begin.
• This flushes the system and can use
large quantities of ink (i.e., whatever is in
the bladders or dampers).
• The following content displays in the control panel.
Remove Cartridges Instructs you to remove the ink cartridges, and install the
cleaning cartridges.
6.2.1 Replacing ink cartridges
—
• Pressing the [Cancel] key shifts to the previous menu
without Head washing.
4.6.1 Setup menu (Setup item 1 of 7 total)
Setup item Setting Description
CR Mainte. Start Begins maintenance.
• Pressing the [Enter] key causes the print head to
move to the left and the cleaning wiper to move
forward.
End Completes maintenance.
• Pressing the [Enter] key causes the print head to
return to its original position and the cleaning wiper
to return to its original position.
—
• Pressing the [Cancel] key shifts to the previous menu
without maintenance.
4.6.1 Setup menu (Setup item 1 of 7 total)