Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 101
4.6.1.5 Media Initial menu
Allows you to set up whether the printer will automatically detect the width and front edge of the media
when initializing the media.
• Set the media width that is set in the Media Width menu when setting "Off" in the
Media detection menu.
4.6.1.6 Media Width menu
4.6.1.6 Media Width menu
If media detection is not performed when initializing the media, this menu allows you to manually set the
distance between the left edge of the media and the 5mm line on the media guide.
(1) Media Width menu (without auto-detection), immediately below
If media detection is
automatically performed during media initialization, the menu displays the detected
media width. .
(2) MediaWidth menu (with auto-detection), immediately below
Setup item Setting Description
Init. Off The media is not detected.
Top&Width Detects the media width and edge while initializing the
media.
<Width> Detects the media width while initializing the media.
—
• Pressing the [Enter] key saves the setting and shifts to
the previous menu.
• Pressing the [Cancel] key cancels the setting and
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
No. Name
1 Front media guide
2Media width
3 5mm line on media guide